Ball bearing for brakelight switch

 5 in stock

 92295708 GU92295708 92 29 57 08
 9229 5708 9229.5708 92.29.57.08

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

 5 in stock

Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

 5 in stock

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Kit consisting of black plastic cap and rubber cap seal for PS 12 round handlebar master cylinders and single horizontal outlet remote reservoirs (e.g. BRG19901 )

Also known as Guzzi ref. 17661052, 10271110. Brembo ref. 110430830. This is the smaller of the two round master cylinder caps used on V35, V50, V65 and 850/1000 models

 4 in stock

 10430830 GU10430830 10 43 08 30
 1043 0830 1043.0830 10.43.08.30

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei

Brakelight switch for handlebar mounted master cylinder

Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815. See ELA30861 for less expensive alternative part. Sometimes supplied with three terminals, in this instance disregard middle terminal

 4 in stock

 30749860 GU30749860 30 74 98 60
 3074 9860 3074.9860 30.74.98.60

M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor

 4 in stock

 98052475 GU98052475 98 05 24 75
 9805 2475 9805.2475 98.05.24.75

Black cover or cap for Stahlbus M6 bleed valve. Prevents contamination of the valve and smartens up your brake caliper

 4 in stock

Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders

Also known as Brembo ref. 110312720

 3 in stock

 19659500 GU19659500 19 65 95 00
 1965 9500 1965.9500 19.65.95.00

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 3 in stock

Also fits Cagiva Elefant E750, Ducati 748

Brembo caliper cover for models with P2 F08 (P8) single bleed nipple calipers

You may need to immerse the cover in warm water before fitting

 3 in stock

 17654760 GU17654760 17 65 47 60
 1765 4760 1765.4760 17.65.47.60